Type: steam heat exchanger, tube/plateheat exchanger
Steam heat exchanger
Steam heat exchanger are used for raising temperature of well effluents to prevent hydrate formation, reduce viscosity and break down emulsions for efficient separation of oil and water. It consists of high-pressure and low pressure split-flow coils located upstream and downstream of an adjustable choke, contained within a steam filled vessel.
Order onlineHeat Exchanger
Type: steam heat exchanger, tube/plateheat exchanger
Steam heat exchanger
Steam heat exchanger are used for raising temperature of well effluents to prevent hydrate formation, reduce viscosity and break down emulsions for efficient separation of oil and water. It consists of high-pressure and low pressure split-flow coils located upstream and downstream of an adjustable choke, contained within a steam filled vessel.
Application: offshore and onshore operations, well cleanups, production/well testing. Service under sour, crude oil, mud, gas service conditions.
Features:
-Insulation aluminum/stainless steel jacket for heat preservation.
-Check valve on steam inlet to avoid steam returing.
-Steam trap on condensate return C/W water exhaust port to prevent freezing
-Safety shutdown for high temperature
-safety shutdown for vessel high pressure
Design and manufacturespecification: SME VIII div1, NACE MR0175, ASME B31.3, API-6A, DNV2.7-3。
Heat exchanger-Tuber/plate
Material: SA516-60, SA516-70, Q345R (HIC, SSC as required) , Stainless steel grade for 304, 304L, 316L, 321, 309, 625, 2205,2507, as well as cladding plate.
Design and manufacture: ASME, GB150, Petrobras and European and American standards standards Etc.
Project case:
High Pressure Heat Exchanger for CNOOC Lingshui Project
Export Project Experience:
Kazakhstan - Aktobe Joint Petroleum Machinery Co. LTD
Jordan Refinery Electrical Desalination And Ancillary Systems Project
Sino Gas & Energy Holdings Limited
Domestic Project Experience:
CNOOC 32-6 Operation Company
QHD 32-6 project of Qinhuangdao operation branch of CNOOC (China) Co., LTD
Shaanxi Coal Chemical Group Shenmu Tianyuan Chemical Co. LTD
Lingshui project of Offshore Oil Engineering Co., LTD
Heat exchanger skid of CNOOC Lvda 5-2N offshore platform
COOEC lingshui 17-2 Marine platform high pressure heat exchanger 2 sets
1 slug flow inlet heat exchanger TS-E-1510 (DN900mm×4000mm)
Design pressure: 12.15MPa, design temperature: -20 ℃
Delivered in July/August of 2020
Slug flow inlet heat exchanger TS-E-1520 (DN700mm×2200mm) 1 set, BEU
Design pressure: 12.15MPA, design temperature: 49℃
Delivered in July/ August 2020
COOEC lingshui 17-2 Marine platform high pressure heat exchanger 5 sets
1st stage production separator Inlet heat exchanger 1 set TS-E-2020(DN800mm×6400mm)
Design pressure: 18.75MPA, design temperature: 100℃~-19℃
Delivered in Dec. of 2019
Low temperature Liqiud/gas heat exchanger TS-E-2820(DN700mm×6000mm) 2 sets
Design pressure: 12.15MPA, design temperature: 74℃~-54℃
Delivered in Dec. of 2019
TC-WS-2750(DN700mm×3350mm) 1 set (fixed tube-plate type, duplex stainless steel)
Design pressure：12.15MPa, Design temperature：150~-19℃
Delivered in Dec. of 2019
Yulong Petrochemical 1#1.5 million tons ethylene plant low-pressure steam generator for emergency oil cooling
Yulong Petrochemical 1#1.5 million tons ethylene plant One section of aftercooler
Previous：Slug Catcher
